Watson-Marlow Fluid Technology Group (WMFTG) is the world leader in niche peristaltic pumps and associated fluid path technologies for the food, pharmaceutical, chemical and environmental industries. Comprising seven established brands, each with their own area of expertise, but together offering our customers unrivalled solutions for their pumping and fluid transfer applications.
- Watson-Marlow Pumps: peristaltic tube pumps for pharmaceuticals and industry
Hose Pumps for Primary / Thickened Sludge Feed
The simple glandless, "straight through" construction without valves, seals, vanes, rotors or impellers, has clear advantages in handling viscous sludges liable to contain grit, rag type or other solids which cause blockages, while the ability to impart minimal shear, combined with the high levels of volumetric accuracy when handling additives such as polyelectrolyte, is important in terms of both efficient flocculation and additive consumption.
Reduced operating costs can be achieved by the installation of Watson-Marlow hose pumps in the feeding of primary or thickened sludge to digesters or filter presses, and in primary tank auto-desludging.
To complete primary auto-desludging, following digester treatment, the sludge goes to secondary storage tanks, where polyelectrolytes are dosed by low-pressure peristaltic pumps prior to dewatering.
More information on sludge feeding and transfer.
Peristaltic pumps have no valves, seals or glands, and the fluid contacts only the bore of the hose or tube. Simple to install, easy to use and quick to maintain, provide a low whole life cost, they are the hot new technology, and the world's fastest-growing pump type.
Supply of quality potable water within current permit levels is paramount, and efficient plant operation is essential in meeting these critical standards.
These chemicals can cause vapour locking, abrasive wear and pump clogging, leading to poor performance and premature failure of traditional metering pumps. Watson-Marlow peristaltic pumps are a proven solution and exceed performance expectations.
- Self-priming to 30ft and dry-running
- 875,000:1 turndown - same pump!
- Accuracy to ±0.5%
- Lowest Life Cycle Cost (LCC)
- No internal check valves, sealless design
- Microlitres to 33L/min
- 60 second pump rebuild
- Will not vapour lock
Applications include pH control, disinfection, primary and secondary disinfection, accurate sampling, metering and dosing of difficult fluids such as sodium hypochlorite, ferric chloride, sodium bisulphite, alum, fluoride, carbon and lime slurries, polymers, aqueous ammonia, potassium permanganate, caustic, aluminium sulphate, flocculants and lime slurry.
More information on water and waste water treatment.
High maintenance diaphragm, rotary lobe, or progressive cavity pumps cannot match the rugged, reliable 24/7 dependability of the Bredel hose pumps which:
- Do not require expensive ancillary equipment
- Pump abrasive slurries, corrosive acids, gaseous liquids, as easily as water - no vapour locking
- Ideal for high viscosity and abrasive products
- Can run dry indefinitely without damage
- No seals, ball valves, diaphragms, glands, immersed rotors, stators or pistons that can leak, clog or corrode
- Fully reversible to clear clogged suction and drain lines safely
- Suction lift capability to 9.5 metres and is self-priming
- True positive displacement for accurate and repeatable metering
Save both time and money with the Bredel hose pumps by reducing your maintenance.
More information on Bredel hose pumps.
At the heart of all Bredel pumps is a remarkable composite reinforced hose. The hose is constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining.
- Over-occlusion of the hose stresses both pump and hose, reduces hose life, and places unplanned loads on the pump bearings.
- Under-occlusion results in loss of pump efficiency and damaging back-flow, which also reduces hose life.
Bredel is the only hose pump manufacturer to machine its own hoses, and no other manufacturer can match Bredel's experience of configuring pump and hose to precisely meet the flow, pressure and temperature characteristics of any application.
Bredel's innovative hose design and unique ground construction has created the benchmark in hose performance and life. The unique design ensures that compression forces are evenly applied, and the enormous restitutional ability of the hose creates powerful suction handling and accurate metering capabilities.
More information on Bredel hoses.
APEX Hose Pumps
The APEX pump incorporates Bredel's long proven direct-coupled technology, delivering the most reliable pump design in a compact footprint. While the APEX gearbox mounts directly to the pump housing, the APEX pump rotor is supported by its own sealed bearing hub, isolating and protecting the gearbox from integral forces. Through superior heat dissipation, precision machined hose elements and optimised hose compression, APEX has been designed to reduce maintenance costs dramatically in comparison with other hose pumps.
Tubing for Peristaltic Pumps
We offer precision tubing in a range of materials including Marprene, Neoprene, GORE STA-PURE Series PCS, and Gore Style 400 tubing for peristaltic, hose and tube pumps.
GORE® STA-PURE Series PCS: Longer service life with the highest pressure rating.
Marprene: Exclusive thermoplastic elastomer which has wide chemical compatibility.
Gore Style 400: High performance chemical resistant tubing.
The Watson-Marlow pump series' is available to OEM customers with almost any original equipment specification possible.
Flowrates are available from under 1 µm / minute to hundreds of cubic metres every hour, between one and 32 channels.
Pumpheads, geared motors, faceplates and speed controllers are available as OEM products. Our expert design consultancy is available for specialised applications.
More information on OEM solutions.more
Bredel Hose Pump Fuels Vital Energy Breakthrough
Bredel pumps offer the Sapphire Project high flow capability essential...article posted by Watson-Marlow Fluid Technology Group
Bredel Present Scalable APEX Hose Pumps
APEX hose pumps are available with a single pump body and a choice of...article posted by Watson-Marlow Fluid Technology Group
Counterfeit Parts - counter to cost-effectiveness?
With the UK water and wastewater industry under continual pressure to...article posted by Watson-Marlow Fluid Technology Group
Hose Pump Automates Effluent Sampling at Thames Water
Watson Marlow Pumps Group's Bredel APEX15 hose pump automates effluent...article posted by Watson-Marlow Fluid Technology Group
Neutralac® SLS45 Liquid Lime with Watson Marlow Dosing Pumps
Lhoist supply Watson Marlow 720UN/RE dosing / metering pumps with thei...article posted by Watson-Marlow Fluid Technology Group
New Qdos 60 Metering Pump for High Accuracy Applications
Watson-Marlow have launched their new Qdos 60 peristaltic metering pum...article posted by Watson-Marlow Fluid Technology Group
Image GalleriesView all Galleries
CategoriesView all Categories
Watson Marlow Pumps Product Overview
An overview of the pumping solutions available from Watson Marlow Pumps Group.
Water and Wastewater Pumps Brochure
Pumping solutions for the water and wastewater industries from Watson Marlow Pumps Group.
Watson Marlow: Mexico City and Zurich Offices
Watson Marlow open new offices in Mexico City and Zurich
Watson-Marlow Fluid Technology Group
Bickland Water Road
TR11 4RU, Falmouth