Runway dryer and cleaner systems for road and runway markings


Road-drying systems for road and runway markings: The W-JET road dryer and cleaner system removes water, moisture, ice and foreign objects to solve adhesion issues caused by wet weather, debris, traffic dirt and tire rubber on roads and runways, as well as from surfaces that have been burned out by ultraviolet (UV) light. Old markings that need refreshment can be treated with W-JET to prevent problems resulting from bad adhesion.

W Aps offers a wide range of different exhausts and heatshields made to fit most type of jobs, ranging from road marking to crack sealing. The solutions have wide and flat nozzles, or narrow, lance-shaped nozzles. They can be operated a short distance above a road's surface, leaving it dry, clean and ready to provide new treatments with the best possible adhesion.

Easy-to-operate drying system: The W-JET Jet turbine can produce up to 65m³/min (cubic meters per minute) of air at a temperature of 700°C, leaving exhaust nozzle at a speeds of up to 300m/s. The system's drying capacity is up to 3,000m²/hr. The equipment is not complicated as it uses automatic controlled operator panels, and maintenance is handled similarly to an outboard engine. This involves disconnecting the wires, loosening four bolts, packing it down on a pallet and sending it to W ApS for service.

Lightweight diesel system for drying roads: The W-JET system is a 25 kg W-JET Module and runs on standard EU-Norm diesel, instead of approximately 2t heavy diesel compressors, gas cylinders or LPG system tanks. It therefore reduces preparation time and the weight of the dryer equipment to provide easier transportation.The system can replace hazardous LPG gas and heavy diesel compressors, running on standard EU-Norm Diesel, added 12% Benzin (gasoline / petrol) and 1.5% turbine oil. The W-JET features the small yet powerful and reliable jet turbine inside a sealed stainless casing of 35 x 25 x 25 cm, as well as inclusive air filter and wheels weighing 45 kg. It delivers the same capacity as a 2t heavy diesel compressor and big LPG gas containers. The application can reduce wait times caused by weather and transport of hazardous goods, as well as work time in congested areas.

Road-marking, crack-sealing and surface cleaning exhaust systems: A wide range of exhaust systems are available for road and runway marking, crack sealing, surface cleaning and weed control applications.

The W-JET dryers are available as self-propelled 2WD, 4WD mini tractors and can be mounted on all types of vehicles.

Development began in 2007, and the system was ready for the market in 2014. The W-JET Road Dryer System was tested in collaboration with two leading road-marking contractors from the start, and used in projects worldwide.


View all Videos


  • Airport Floors and Flooring

    Airport floors and flooring is required to be robust enough to withstand the large amount...

  • Airport Maintenance

    Find companies providing airport maintenance equipment, tools and services for tasks...

  • Runway Rubber Removal

    Runway rubber removal solutions, including mobile, high pressure water blasting vehicles...

  • Runway Markings

    Runway markings are important to indicate the area in which an aircraft should aim to land...

View all Categories

You are about to contact W-JET. Please fill in the form below and your enquiry will be sent directly to the supplier's email address.

Fields marked with are required

Enquiry sent

Your enquiry has been sent successfully to W-JET. You will be contacted by one of their representatives shortly.

Would you like to receive enquiries like the one you have just sent?

Add your company below!

Thank you for using Copybook. Click here to send another enquiry.


Oops... An error occured during your enquiry submission.

Please try again later or contact the system administrator at

Click here to re-send the enquiry.

5800, Nyborg

page up