MCR & MCR/K RFID card readers for wall mounting

The MCR and MCR/K RFID card readers are ProxTech’s most versatile wall mount readers. Available for both 125 kHz as well as 13,56 MHz with a wide choice of data interfaces, this reader has shown to be the ideal solution for mid range reading in applications where wall mounting is required. An extra mounting frame makes it very easy to mount this reader when the signal cable is placed on top of the wall; you can just feed it through the mounting frame.

Available versions: 

  • MCR-EM : a 125 KHz reader for EM4x02 transponders
MCR/K-EM : same as above, but with integrated keypad MCR-HT : a 125 KHz reader for Hitag transponders MCR/K-HT : same as above, but with integrated keypad MCR-MF : a 13,56 MHz reader for MIFARE transponders MCR/K-MF : same as above, but with integrated keypad MCR-LG : a 13,56 MHz reader for Legic transponders MCR/K-LG : same as above, but with integrated keypad MCR-FLEX : a 13,56 MHz reader for multi-ISO transponders (ISO14443, ISO15693, ISO18092 NFC) MCR/K-FLEX : same as above, but with integrated keypad

All these reader types can be supplied with a wide selection of different data interfaces, such as various Wiegand or Clock&Data outputs, but also TTL, RS232, RS485 or customer specific interfaces.

Technical specifications

  • Dimensions: 80 x 80 x 18 mm (An optional mounting support ( 20mm ) is added to each reader.)
  • Interface:  
    • Wiegand (several bitblock lengths available)
    • Clock & Data (several number of characters available)
    • RS232 (9600, 4800 or 2400 Bd)
    • TTL (9600, 4800 or 2400 Bd)
    • RS485
    • customer specific interfaces available on request
  • Read range with internal antenna (values depending on transponder types, power supply and ambient environment)
    • on 125 kHz up to 150 mm
    • on 13,56 MHz up to 80 mm
  • Power supply : 5 Vdc, 12Vdc or 9 … 24 Vdc
  • Duplicate read control
  • Indications : 3 LED’s ( red / yellow / green ) + buzzer
  • Wiring : screw connector block
  • Protection rate : IP65 ( depending on mounting method )
  • Operating temperature : -20 °C to + 60 °C
  • Integrated antenna and electronics
  • Fully potted housing allows easy installation both in- as outdoor
  • Integrated keypad for MCR/K version
  • Available in black or white housing
  • Optional : this reader can be completed with an optional relay and/or digital inputs to create a remote access terminal with RS485 interface
Fields marked with are required
page up