Demining Machines and Mine Clearance Vehicles

Prime Tech

The PrimeTech brand was founded in 2005 within the Italian FAE Group from which it inherits twenty-years of experience in the design and realization of  professional mulching shredders for tractors, skid steer loaders, excavators and special vehicles (prime movers).

Since then PrimeTech’s signature designs tracked carriers that, depending on the fitted FAE head are used, can be used for mine clearance, forestry applications and the stabilization / remediation of soil.more

After extensive research and development in the field of mine clearance, PrimeTech has recently adapted its two top vehicles, the PT-300 with 275 HP and the PT-400 to 415 HP, to the remediation of mined areas. Both have been reinforced with special steel and equipped with demining heads that hit the ground causing detonation of the mines through milling.

Mine Clearing Vehicles

PT-300 D: Mine (category Medium Machine) is a tracked carrier with a remote control module  that receives the signal up to a distance of 1000 m. These mine clearing vehicles are equipped with the forestry tiller FAE 300/TD of which its working width is 2500 mm and is designed to clean up areas affected by dense vegetation, able to withstand explosions from anti-tank and anti- personnel mines. The Hardox® and Weldox® steel makes tool and rotor wear-resistant while the Periflex system ® protects the head during the explosion.

Depending on the type of ground on which it operates (which is made ​​of earth, sand, or gravel) PT-300 D:Mine reaches a daily productivity up to 25000 m² and is able to work at depths of up to 250 mm. The ground pressure exerted by the vehicle is of only 0.26 kg / cm ², thanks to the oscillating undercarriage which is capable of maintaining excellent mobility both on land with steep slopes and in swampy areas which are made ​​inaccessible due to mud and snow.

Demining Machines

The PT-400 D: Mine range of demining machines are equipped with an armoured cab that is driven by the operator. The demining head is a FAE 500/TD,  designed with the same technical characteristics of the FAE 300/TD but with a working width of 2750 mm and a working depth of up to 300 mm depending on the type of soil. The daily production of the PT-400 D:Mine, which is always subject to the conditions of the remediation area to be cleaned up is around 35000 m² while the pressure that the vehicle exerts on the ground is just 0.35 kg / cm ²: excellent statistics, given the size of the machine!less

Videos

View all Videos

Articles

View all Articles
View all Galleries

Categories

  • Bomb Disposal Equipment

    Suppliers specialising in bomb disposal equipment for the military and defence sector,...

  • Minesweepers

    Minesweepers are small warships used in the Navy to nullify potential threats from...

  • Mine Detection and Removal

    Find Bomb, IED and mine detection and removal services. Find companies that specialize in...

View all Categories

You are about to contact Prime Tech. Please fill in the form below and your enquiry will be sent directly to the supplier's email address.

Fields marked with are required

Enquiry sent

Your enquiry has been sent successfully to Prime Tech. You will be contacted by one of their representatives shortly.

Would you like to receive enquiries like the one you have just sent?

Add your company below!

Thank you for using Copybook. Click here to send another enquiry.

Error

Oops... An error occured during your enquiry submission.

Please try again later or contact the system administrator at admin@copybook.com.

Click here to re-send the enquiry.

Prime Tech
Via G. Marconi, 20
38011, Sarnonico
Italy

page up
×