Product Kits & Accessories

AAR Mobility Systems

At AAR, we understand that you may need more than just an empty container or shelter to meet your specific mission requirements. That's why we offer over 800 Kit Configurations for ISU® Containers, as well as a full line of accessories for Containers, Shelters, and Pallets.

For more information on our ISU kits, visit our website at www.aarmobilitysystems.com or call us at 800-355-2015.

ISU® CONTAINER ACCESSORIES

MOBILITY CASTER SET

Mobility Caster Set
  • Part Number: 60037-001 
  • NSN: 8145-01-384-9260
  • Weight: 47 lbs. each
  • Shipping Weight: 240 lbs./set
  • Height: 12.75"
  • Set includes 4 wheel assemblies
  • Can move up to 12,000 lbs.
  • Casters attached with quick-release pins through detent rails
  • Maximum versatility for moving containers and pallets
  • Easy loading and unloading for aircraft equipment cargo handling systems
  • Eliminates need for forklift vehicles

 

ISU® MOBILITY TOW BAR

Mobility Tow Bar
  • Part Number: 60040-001
  • NSN: 8145-01-385-7290
  • Weight: 70.4 lbs. 
  • Utilized with Mobility Caster Set for towing containers in warehouse and hard-stand areas at speeds not to exceed 5 mph
  • Adjustable for use on edges of all model ISU® Containers (48"W, 88"W, or 108"W)
  • Drilled on all four sides
  • Instructions included for required drilling to install

 

 

 

 

DEHUMIDIFICATION UNITS

Dehumidification Units
  • Part Number: 60398-002 Field/Customer Installed
  • NSN: 8145-01-484-2922
  • Part Number: 60398-001 Factory Installed
  • Part Number: 60398-008 Factory Installed
  • Dimensions: 17.25" X 12.5" X 9.63"
  • Weight: 27 lbs.
  • Includes small drive motor and belt to rotate wheel, an integral humidistat and a customized printed circuit board
  • Delivers 50 scfm and removes 28.6 lbs. of H20 24-hours at 90°F
  • Can be configured for 115V/ 60Hz or 220V/50/60Hz; 1PH; .935kW power required
  • Requires 2 air filters
  • Accessories available - surface mounting pan, duct transition adapter, light weight flexible duct and heavy duty power cord

 

ISU® STORAGE SKID KIT

ISU Storage Skid Kit
  • Part Number: 60168-001
  • NSN: 8145-01-467-6574
  • Weight: 1,702 lbs.
  • Keeps container off ground and protects bottom from foreign object damage
  • Eliminates shoring/dunnage requirements
  • Allows pickup from end by 72" tined forklift (loading 2.5-ton truck. 5-ton truck, etc.)
  • Skid inserts through container edge rail and pins in place with quick-disconnect pin
  • Height of skid gives forklift accessibility to bottom of container when forklift has 72" tines

 

ISU® DIVIDERS

ISU Dividers

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

ISU® SHELVES, BRACKETS, & STRAP ASSEMBLIES

ISU Shelves and Storage Brackets

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

SMALL PARTS CABINETS

Small Parts Cabinets

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

 

 

8" STORAGE TRAYS

8" Storage Trays

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

 

5" STORAGE TRAYS

5" Storage Trays

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

 

WEAPONS RACKS

Weapons Rack

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

 

 

LOW SPEED MOBILITY WHEEL SETS (LSMWS)

Low Speed Mobility Wheel Sets
  • Part Number: 60055-003
  • NSN: 8145-01-394-5464
  • Dimensions: 154"L X 95.2"W w/88" Bar
  • Part Number: 60055-004
  • NSN: 8145-01-394-5463
  • Dimensions: 174"L X 90.4"W w/108" Bar
  • Weight: 1,350 lbs.
  • Payload: 12,000 lbs.
  • Transports ISU® Containers and 463L compatible pallets
  • Towable by vehicle equipped with pintle-type hitches
  • Equipped with emergency hand brakes
  • Hydraulic lift system that uses military 24-volt prime-mover power
  • Removable tongue for airlift operations
  • Maximum speed: 10 mph
  • Can utilize pallet on LSMWS to move cargo around
  • Can be used as helicopter and transport aircraft loading device
  • Operational on variety of road types and off-road terrains (not designed for highway use)

 

ISU® M720/832 MOBILIZER ADAPTER

Mobilizer Adapter
  • Part Number: 60027-001
  • NSN: 8145-01-486-2443
  • Dimensions: 123.5"L X 88"W X 33.6"H
  • Weight : 1,500 lbs.
  • Payload : 12,000 lbs.
  • For use with unit-owned M720/832 Mobilizer 
  • Attachment points provided for standard 463L configured loads
  • 7,500 lb. capacity cargo tie-down rings around periphery
  • Non-skid tread plate floor
  • Carries one fully loaded ISU® Container, Intex Pallet, or standard 463L Pallet

 

ISU® KC STACKING RACKS

KC Stacking Racks
  • Part Number: 60210-001 Black
  • NSN: 8145-01-468-4114
  • Dimensions: 108"L X 84.5"W X 22.25"H
  • For improved storage and rapid deployment of KC-Series Containers (ISU® 70KC/KCA, ISU® 90KC/KCA)
  • Allows stacking of two KC-Series Containers
  • Optimizes space management

 

 

 

 

 

ISU® TIRE RACKS

Military Tire Racks
  • Part Number: 60041-002 Standard Kit - 108" W (two required per side - one kit fits in one quadrant)
  • NSN: 8145-01-391-3816
  • Part Number: 60041-003 - for ISU® 90EO - 88"W
  • Racks are adjustable and mount to ISU® Container shelf tracks
  • Racks have design capabilities to interface with all military aircraft tires
  • Racks will hold tires for most types of military vehicles
  • Racks are available for both full-size and half-size ISU® Containers
  • NOTE: Other configurations of ISU® Tire Racks are available upon request

 

HAZMAT ACCESS PANEL

Hazmat Access Panel
  • Part Number: 60105-002 - Factory Installed
  • Part Number: 60105-005 - Factory Installed
  • Part Number: 60105-001 - Field Installed
  • Dimensions: 25.25"H X 27.25"W
  • Weight: 50 lbs.
  • Air Force Joint Service Manual 24-204, Chapter 11, Attachment 21, replaces AFM71-4 and states the following: "If a container can be accessed in flight, i.e. with the use of hazardous material panel, it is permissible to airlift hazardous material in an ISU® Container"

 

ISU® CARGO RESTRAINT NETS

ISU Cargo Restraint Net

See our website for complete list with part numbers, NSN's, dimensions, weights, and what products they fit into

 

 

 

 

 

 

 

 

TIE-DOWN RINGS

Tie Down Rings
  • Part Number: 60177-001 - 16 Tie-Down Rings
  • Part Number: 60177-002 - 8 Tie-Down Rings
  • Payload Capacity: 1,600 lbs. maximum

 

 

 

 

 

ISU® REPAIR KIT

ISU Repair Kit
  • Part Number: 60085-001
  • NSN: 8145-01-391-3853 
  • Dimensions: 50.50"L X 14"W X 6"H
  • Weight : 50 lbs.
  • Repair Kit furnished with the necessary materials for general repair of ISU® Containers 
  • See our website for complete list 
  • Refer to container technical manual for specific repair instructions

 

ISU® MEZZANINE SYSTEM

ISU Mezzanine System
  • Part Number: 50120-002 - Set
  • NSN: 8145-01-484-2916
  • Part Number: 50120-201 - Deck (sold separately)
  • NSN: 8145-01-478-0650
  • Part Number: 50120-202 - Stairway (sold separately)
  • NSN: 8145-01-478-0688
  • 4-ft. X 8-ft. aluminum reinforced platform
  • Light weight aluminum construction
  • 1500 lb. capacity
  • Eliminates need for fixed warehouse mezzanine system
  • Setup with a standard warehouse forklift
  • Deployable warehouse can be set up like home station
  • Designed for maximum setup configuration with multiple stairway and rail mounting brackets
  • Designed for the 56000 Series ISU®

 

SHELTER ACCESSORIES

HIGH SPEED MOBILITY WHEEL SET (HSMWS)

High Speed Mobility Wheel Set

See our website for a complete list with part numbers, NSN's, descriptions, and specifications

 

 

 

 

 

ADAPTER RAIL KIT FOR HSMWS

Adapter Rail Kit For HSMWS
  • See our website for a complete list with part numbers, NSN's, descriptions, and specifications
  • *NOTE: Sling Chain (86060-082) required with HSMWS if shelter (except single-pallet shelters) is to be helicopter sling lifted or forklifted to prevent any damage - Four are needed per shelter

 

 

 

 

20-FOOT ISO/MECC MOBILITY TRAILER

20 Foot ISO Mobility Trailer

See our website for a complete list with part numbers, NSN's, descriptions, and specifications

 

 

 

20-FOOT ISO/MECC HSMWS MOBILIZER

20 Foot ISO Mobilizer
  • Part Number: 60373-001
  • Weight: 6,320 lbs.
  • Gross Axle Weight Rating: 15,250 lbs.
  • Gross Vehicular Weight Rating: 30,500 lbs.
  • Ride Height: 20" Ground Clearance at Ride Height
  • Maximum Speed: 55 MPH on developed roads

 

 

 

 

ISO MEZZANINE SYSTEM

ISO Mezzanne System
  • Part Number: 50120-218
  • Dimensions: 52" x 96" Platform
  • Platform Capacity: 1,845 lbs.

 

 

 

 

 

 

SHELTER SOFTWALL REPAIR KIT

  • Shelter Softwall Repair Kit
    Part Number: 50389-289
    • 2 Yards Vinyl, 2 Yards Poly, 1 Roll Double-Sided Tape, 8 Oz. Cement
  • Part Number: 50389-342
    • 2 Yards Vinyl, 2 Yards Poly, 1 Roll Double-Sided Tape, 8 Oz. Cement

 

 

 

STORAGE & WORKSPACE SOLUTIONS

Storage Workspace Solution

See our website for a complete list with part numbers, NSN's, descriptions, and specifications

 

 

 

 

 

 

 

 

CARGO RESTRAINT NETS

Cargo Restraint Nets

See our website for a complete list with part numbers, NSN's, descriptions, and specifications

 

 

 

 

 

 

PALLET ACCESSORIES

AIR CARGO PALLET NETS

  • Cargo Pallet Nets
    Part Number: 86801-005
    • NSN: 1670-00-969-4103
    • Top Restraint Net HCU-15/C - Yellow
    • Dimensions: 18.5"L X 12.5"W X 13"H
    • Weight: 25 lbs. each
    • Capacity: 10,000 lbs.
  • Part Number: 86801-006
    • NSN: 1670-00-996-2780
    • Side Restraint Net HCU 7/E - 2 nets required per pallet - Olive Drab
    • Dimensions: 18.5"L X 12.5"W X 13"H
    • Weight: 23 lbs. each
    • Capacity: 10,000 lbs.
    • Maximum cargo stock height is 96 inches

 

TIE-DOWNS

Military Tie Downs

See our website for a complete list with part numbers, NSN's, descriptions, and specifications

 

 

 

 

PALLET COUPLERS

Pallet Couplers
  • Part Number: 86601-010
  • NSN: 1670-01-061-0990
  • Square Pallet Coupler
  • Part Number: 86601-016
  • NSN: 1670-01-487-8743
  • Rectangular Pallet Coupler

 

 

 

ROLLARIZED TINE ADAPTER SET

Rollarized Tine Adapter Set
  • Part Number: 60136-001
  • NSN: 8145-01-469-1006
  • Steel Nose
  • Part Number: 60136-002
  • NSN: 8145-01-469-1010
  • Rubber Nose
  • Dimensions : 96" L X 18"W
  • Payload Capacity: 10,000 lbs.

 

PALLET STACKERS

Pallet Stackers
  • Part Number: 60157-001
  • NSN: 3990-01-477-5074
  • For 463L 108" x 88" Pallet
  • Dimensions: 94"W X 114"L X 70"H Exterior; 88.5" X 108.5" Interior
  • Weight: 1,806 lbs.
  • Keeps up to 20 HCU-6/E pallets (108" x 88") stacked and organized for safety
  • Increases accountability and helps pallet life cycle cost stay low
  • Pick up as many or as few pallets from the stacker unit as needed 
  • Prevents accidents due to loose pallets in high-traffic loading areas

 

ECU/GENERATOR PALLET

Generator Pallet
  • Part Number: 60367-002
  • NSN: 8145-01-534-0405
  • Pallet 463L Utility Assembly with two (2) 42,000 BTU Environmental Control Units, one (1) 66,000 Generator Set, and one (1) PDU
  • Dimensions: 96"W X 178"L X 97.30"H
  • Weight : 7,380 lbs.
  • Maximum Gross Weight : 8,000 lbs.
page up
×